Friday, December 08, 2017

Posted by Unknown on 11:33:00 am with No comments | Categories: , , , , ,
Hello, "My blog readers"..
It's been too long that I've posted  any posts in this blog, b'coz I was seriously working on some other projects and working on some new skills.
Anyways let's this tutorial on how to flash your Android - The easy way

Note: This is a strict advice that if you don't have any proper experience with the mobile bricking, please do some research but if you unfortunately make your mobile dead... I'm not responsible♥



So, let's start the tutorial....



These are the things you're gonna need:

1. SP Flash Tool V2 - You can find the latest version here

2. Drivers setup - To identify your device, you'll get to know about it later in the tutorial

3. Any Android Mobile - Compatible USB cable

4. Computer with windows 7  or later

5. Custom ROM files for your Android Mobile - You can find it here

Step 1 :

First, before you install SP Flash tool you need to configure your PC to enable connectivity
ASSUMING YOU'RE  USING WINDOWS 10

Go to Settings > Update and Security > Recovery > Advanced Startup > Restart Now  ( Wait, see the below steps first, so that you can prepare yourself for the next steps)













This step will enable you to install driver setup which you've downloaded earlier by disabling driver signature enforcement - This is safe....

Step 2 :

Now, you need to install driver setup by extracting the archive file you've downloaded

Extract SP_Driver_V2.0_Install.exe/setup.exe from SP_Driver_V2.0_Install.rar using 7zip or any other suitable extracting tool.

This installation is normal like any other software, so I think you can do it on your own.

Step 3 :

Now, Open flash tool








Then select the Android Scatter.txt file from the custom ROM files, this will tell the SP Flash tool which files needs to be flashed to your mobile.

If you want to Save UserData on your device, Untick userdata from the list.


Click on download, then switch off your Android Mobile and connect it to the PC using the compatible USB cable.


As soon as your PC finds your device, SP Flash tool show the details of your device similar to the image below:


Then you see the progress bar in the bottom of the SP Flash tool which shows the percentage of the flashing process..

After successfully flashing your device, a green tick will appear like the image below:


Note: Factory Reset in Recovery Mode after flashed to 6.0 is suggested but not compulsory (It can prevent some minor OS update bugs).

Then you are good to disconnected your device and turn if on..

As it is the first boot of the device after flashing, it would take a few minutes longer than usual to configure your device.

Some other useful information: 
1. Flashing via SP Tool will not destroy the warranty 

2. Root access not required for this 

3. You will get OTA (Wireless update) after flashing


I hope you enjoy this tutorial, and shoot your problems in the comments section below, if any!..

Thank You

0 comments :

Post a Comment

Don't hesitate to comment, please provide suggestions and feedback

Recent in Sports

Search